Table of Contents
Advertisement
60.6
Compare Mode and
Measure Mode
988
Comparison
The panel shows the comparison results according to the defined settings.
When in measure mode, measure a point to get the comparison result.
Tap on a point in the 3D viewer. The displayed values are updated.
Key
Description
OK
To exit the app without storing any comparison results.
Capture
Screenshots can be taken from the display as additional
information.
The screenshot is displayed and can be edited by sketching.
The screenshot can be linked with points manually. Sketching
on the screenshot is possible.
Measure
To measure to any point and to compare it against the cur-
rent reference surface.
Page
To change to another page on this panel.
Fn Settings
To configure the app. Refer to "60.3 Configuring Inspect sur-
faces".
Fn Tools
Refer to "60.7 The Toolbox".
Description of fields
Field
Option
Distance to
Display only
surface
Easting,
Display only
Northing
and Height
Easting pro-
Display only
jection,
Northing
projection
and Height
projection
Next step
Fn Tools to access the report options.
Description
The distance of the selected point to the ref-
erence surface.
The coordinates of the selected point.
The coordinates projected onto the reference
surface.
Inspect Surfaces
Advertisement
Table of Contents
