Table of Contents
Advertisement
Point ID,
Elevations page
86
Field
Option
Network
solution
Network
FKP, VRS,
type
MAX, i-MAX
Nearest
RTK data
Display only
format
Number of
Display only
reference
stations in
solution
Mountpoint
Display only
Point meas-
Display only
ured inside
network
User ID
Display only
Next step
Page changes to the next page.
On this page, multiple elevations which have been stored with a staked point
can be edited. Additional multiple elevations can be entered.
Refer to "Stake Results,Elevations page" for more information on multiple ele-
vations.
Description
Displayed when Use RTK network is
checked in RTK Rover Settings, RTK net-
work page.
The type of reference network selected in
RTK Rover Settings. Refer to "RTK Rover
Settings,RTK network page".
If Network type: Nearest is selected in RTK
Rover Settings, a singlebase solution is cal-
culated and the number of base stations
equals 1.
Refer to "RTK Rover Settings,General page".
For single-baseline solutions, this num-
•
ber is always 1.
•
For VRS and i-MAX, this number is
always 1 since it is not possible to derive
the number of base stations contributing
to the VRS or i-MAX corrections from the
data format.
For network solutions, this information is
•
derived from the content of the data for-
mat. Only RTCM v3 and Leica 4G are
able to provide this number.
The name of the correction data stream that
was selected from the source table received
in the TCP/IP port. Available for network RTK
with Ntrip.
The information is available for all Ntrip con-
nections independent from the Network
type used. The information is derived from
the Connection Settings, either manually
defined or selected from the NTRIP Source
Table.
Available for network RTK with Ntrip and MAX
and data format RTCM v3 or Leica 4G.
Available for single baseline RTK, network
RTK with/without Ntrip.
Job Menu - View & edit data
Advertisement
Table of Contents
