Table of Contents
Advertisement
Setup Results,
Targets page
Setup - TS
Field
Option
Easting
Display only
quality (1 σ)
Northing
Display only
quality (1 σ)
Height qual-
Display only
ity (1 σ)
New orien-
Display only
tation qual-
ity (1 σ)
Next step
Page changes to the Targets page.
This panel displays information about the accuracy of the measured target
points and allows exclusion of measurements from the calculation.
Extra measurements can be made and measurements can be deleted.
This page is not available for setup method Orientate to line.
Key
Description
Set
To set the calculated setup for all setup methods. The setup
values are updated automatically if target points are added
or removed.
Use
To change between using the selected point as 3D, 2D, 1D or
not at all, in the calculation. The change automatically
updates any new coordinate or orientation values.
For setup method Orientate to object: To set Yes or No in
the metadata for excluding/including the highlighted point
for the calculation.
Remove
To delete a point from the list of measured target points and
exclude it from the Setup calculation.
More
To change the metadata displayed.
Page
To change to another page on this panel.
Description
Standard deviation of the calculated setup
Easting.
Available for setup methods Resection and
Orientate to object.
Standard deviation of the calculated setup
Northing.
Available for setup methods Resection and
Orientate to object.
Standard deviation of the calculated setup
height.
Standard deviation of the calculated orienta-
tion.
891
Advertisement
Table of Contents
