Table of Contents
Advertisement
Point ID,
Stake results page
Job Menu - View & edit data
Key
Description
Fn Ell Ht or
Available for local coordinates. Changes between the ellip-
Fn Height
soidal and the orthometric height. Changing the height
type does not edit the point.
Next step
Page changes to the next page.
On this page, the stakeout results are displayed.
☞
When changing Target height on the Obs page, the Measured
height value is updated. The offset values used for staking the point
will not be editable on the Offset page.
Key
Description
Store
To store the changes.
Page
To change to another page on this panel.
Description of fields
Field
Option
Design
Display only
point ID
Difference
Display only
in easting
Difference
Display only
in northing
Cut/Fill
Display only
2D distance
Display only
3D distance
Display only
Design east-
Display only
ing
Design
Display only
northing
Design
Display only
height
Measured
Display only
easting
Measured
Display only
northing
Measured
Display only
height
Description
The name of the design point that was
staked.
The difference between the Design easting
and the Measured easting.
The difference between the Design north-
ing and the Measured northing.
The height difference between the Design
height and the Measured height.
Displays the horizontal difference between
the design point and the staked point.
Displays the spatial difference between the
design point and the staked point.
The entered design Easting.
The entered design Northing.
The entered design elevation.
The Easting measured at the stored point.
The Northing measured at the stored point.
The height measured at the stored point.
83
Advertisement
Table of Contents
