Table of Contents
Advertisement
22
22.1
22.1.1
Description
☞
Access
Measure & Target
Settings - TS instrument
Settings - TS instrument
Measure & target
Measure & Target
The settings on this panel define the active EDM (Electronic Distance Measure-
ment) and ATRplus (Automatic Target Recognition) settings.
Available options depend on the purchased model, for example with or without
ATRplus.
Select Leica Captivate - Home: Settings\TS instrument\Measure & target.
Description
•
This panel has two pages - the Measure page and the Setup page.
The Measure page and Setup page contain identical fields.
•
The settings made in the Measure page are used by all apps and all meas-
•
urements taken outside of the Setup app.
The settings made in the Setup page are only used inside the Setup app.
•
•
Any changes made to the Measure & Target, for example using icons or
hotkeys, while the Setup app is active, only affect the SetupMeasure &
Target.
•
Any changes made to the Measure & Target, for example using icons or
hotkeys, while the Setup app is not active, only affect the MeasureMeas-
ure & Target.
When entering the Setup app, the SetupMeasure & Target are active.
•
When leaving the Setup app, the MeasureMeasure & Target are active.
•
•
Both Measure and SetupMeasure & Target are part of the working
styles.
Key
Description
OK
To accept changes and return to Leica Captivate - Home.
Page
To change to another page on this panel.
Fn Test
To access the Measurement Signal Test panel.
249
Advertisement
Table of Contents
