Staking To A Line - Leica Captivate Technical Reference Manual

41.6
Description
Stake to line - hori-
zontal measurements
Measure to line/Stake to line
Next step
Page changes to the user definable
ure to line/Stake to line" for information on all available items.
Displayed is in 3D viewer
• the horizontal distance or chainage along the line from the start point to
the reference point.
the perpendicular offset from the line measured from the reference point
•
to the measured point.
the cut/fill value.
•

Staking to a Line

Allows for the position of a point to be defined relative to a line and then
staked.
P3
d2
d4
P2
d5
d3
P0
004099_002
P4
d2
d4
d3
P0
P1
004098_002
page. Refer to "41.3 Configuring Meas-
For GS:
P1
P0 Start point
P1 End point
P2 Design point
d1
P3 Reference point
d1 Line offset
d2 Distance along line
d6
d3 Defined line distance
d4 Defined offset
d5 Difference in offset
d6 Difference in distance
along line
For TS:
P0 Instrument setup
P2
P1 Start point
P2 End point
d1
P3 Design point
P4 Reference point
d6
d1 Line offset
P3
d5
d2 Distance along line
d3 Defined line distance
d4 Defined offset
d5 Difference in offset
d6 Difference in distance
along line
587