AT Command Lines
244
The AT commands configure the devices. Refer to the manual of device for
information about which AT commands must be entered or contact the sup-
plier.
Description of fields
Field
Option
Initialisa-
Editable field
tion 1
(continued)
Editable field
Initialisa-
Editable field
tion 2
Dial
Editable field
Hang-up
Editable field
Escape
Editable field
Connect
Editable field
Next step
Store returns to New Device or Edit Device.
Description
Initialisation sequence to initialise digital cel-
lular phone/modem.
When the device is used, between Initialisa-
tion 1 and Initialisation 2, a check for the
PIN is performed.
Allows the Initialisation 1, Initialisation 2
or the Dial string to continue onto a new
line.
Initialisation sequence to initialise digital cel-
lular phone/modem.
Dialling string used to dial the phone number
of the real-time base.
Hangup sequence used to end the network
connection.
Escape sequence used to switch to the com-
mand mode before using the hangup
sequence.
Dialling string used to dial into the Internet.
Configuration of Devices