Table of Contents
Advertisement
Access
Vertical Alignment,
Elements page
44.6.2
Access
Vertical Start Point
Roads - Alignment Editor
Start Point
•
•
Straight (Tangent)
Parabola
•
Asymmetric parabola
•
Curve
•
as well as checking the vertical alignment.
Throughout the whole component height and elevation is used for local ortho-
metric height. If no local orthometric height is available, the local ellipsoidal
height is used instead.
In Alignment Editor Menu highlight Edit vertical alignment. Press OK.
☞
Use PVI instead of element for vertical alignment definition
must be unchecked in Measure Settings, Advanced page.
The available keys are identical to the keys in Horizontal Alignment. Refer to
the paragraph "Horizontal Alignment,Elements page".
Editing the Start Point
In Vertical Alignment, highlight the start point and press Edit.
Key
Description
OK
To accept the panel entries and continue.
Get point
To apply heights from an existing point in the job.
Meas app
To go to Measure and measure a point.
Fn Settings
To configure the app. Refer to "44.3 Configuring Alignment
Editor".
Fn Reset
To reset all panel entries.
Description of fields
Field
Option
Height
Editable field
Start chain-
Editable field
age
Description
Elevation at the start chainage of the vertical
alignment.
Start chainage of the vertical alignment.
723
Advertisement
Table of Contents
