Table of Contents
Advertisement
Enter the Following
25.3
Description
Access
GS Quality Control,
General page
300
This panel is displayed when prompting is configured in Prompt Before Stor-
ing and when storing a point with Store or Measure.
☞
Only the fields relating to the ticked check boxes in Prompt Before
Storing are shown.
GS quality control
The settings on this panel define the limits for coordinate quality accepted for
point occupations.
Select Leica Captivate - Home: Settings\Point storage\GS quality control.
Key
Description
OK
To accept changes.
Parameter
To configure the time interval after which a point occupation
can be stopped automatically.
Page
To change to another page on this panel.
Description of fields
Field
Option
Automati-
Check box
cally stop
point meas-
urement
Stop meas-
urement
based on
Accuracy or
Positions
Description
Activates a selectable list for the stop criteria.
Stops the measurements automatically when
the parameter defined for Stop measure-
ment based on reaches 100 %.
Defines the method used for Automatically
stop point measurement. The setting
determines the computation and value to be
shown in the Measure panel. Parameters for
the selected method are defined with
Parameter.
Available when working with real-time
device. Records observations between press-
ing Measure and Stop. Recommended for
normal real-time applications. Refer to the
diagram below.
Settings - Point storage
Advertisement
Table of Contents
