Table of Contents
Advertisement
Existing Surface
59.4.5
Surface Task Selec-
tion
972
The fields available are identical with the fields in Surface status, General
page. Refer to "59.4.3 Create a New Surface from Previously Stored Points".
Next step
Select the desired surface ID then press OK. OK continues to Surface Task
Selection. Refer to 59.4.5 Selecting the Surface Task.
Selecting the Surface Task
Description of the options
Options
Add more points to the
surface by measuring indi-
vidual points
Add more points to the
surface by scanning a grid
of points
Review & edit the surface
Edit the boundary & trian-
gulate surface
Calculate the volume
Exit the app
Next step
Select the task to do next. OK selects an option.
Description
To measure points defining a new surface or
extending existing surfaces and boundaries
by surveying. Refer to "59.4.1 Create a New
Surface by Measuring New Points".
To add more points to the surface by grid
scanning new points. The grid scan proce-
dure restarts.
To view the surface summary and add/
remove points from the surface. Refer to
"59.4.3 Create a New Surface from Previ-
ously Stored Points".
To define/redefine the boundary using man-
ual point selection, or one of the existing
automatic methods, and then create a trian-
gulation. A DXF model can then be exported
if desired. Refer to "59.4.6 Boundary Defini-
tion".
Available after the surface has been triangu-
lated.
To compute the volume of a surface by a ref-
erence (3D point, entered elevation) or by
the stockpile method. Refer to "59.4.7 Com-
pute Volumes".
To end the app and return to the panel from
where Volume Calculations was accessed.
Volumes & Surfaces
Advertisement
Table of Contents
