Table of Contents
Advertisement
Settings,
General page
Stakeout
This panel consists of several pages. The explanations for the softkeys given
here are valid for all pages, unless otherwise stated.
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Page
To change to another page on this panel.
Fn About
To display information about the program name, the version
number, the date of the version, the copyright and the arti-
cle number.
Description of fields
Field
Option
Automati-
Check box
cally select
next closest
point
Store point
Design
with
point ID
Design
point ID &
prefix
Design
point ID &
suffix
Individual
point ID
Prefix / suf-
Editable field
fix
Description
The order of the points suggested for staking
out.
When this box is checked, then the next
point suggested for staking out is the point
closest to the point which was staked. If
there are many points in the job, the search
can take a few seconds.
When this box is not checked, the next point
suggested for staking out is the subsequent
one in the job.
The staked points are stored with the same
point IDs as the points to be staked.
Adds the setting for Prefix / suffix in front
of the original point IDs.
Adds the setting for Prefix / suffix at the
end of the original point IDs.
The staked points are stored with an alpha-
numerical point ID entered.
Available for Point ID: Design point ID &
prefix and Point ID: Design point ID &
suffix. The identifier with up to four charac-
ters is added in front of or at the end of the
ID of the staked point.
895
Advertisement
Table of Contents
