Leica Captivate Technical Reference Manual page 412

Object Display,
Scans page
412
Field Option
Line IDs Check box
Alignments Check box
Alignment Check box
ID
Lines &
alignments
size
3 pixels
2 pixels
1 pixel
Vertical Editable field
exaggera-
tion of pro-
files
Display Check box
additional
layers in
cross sec-
tion view
Next step
Page changes to the Scans page.
Description of fields
Field Option
Scans Check box
Colour
scans using
Description
☞
Points are only displayed on the
image. They are not saved with the
image.
When this box is checked, then the line IDs
are displayed with the lines.
When this box is checked, then the active
alignment of the active Rail, Road or Tunnel
job is displayed.
When this box is checked, then the line IDs
for all shown alignments are displayed in.
Determines the thickness of selected and
non-selected lines.
Non-selected lines
3 pixels
2 pixels
1 pixels
A scale factor to be applied over the vertical
axis. A profile will be exaggerated in the ver-
tical direction, but it will remain the same for
the horizontal. The value can be between 0.1
and 50.
☞
This setting only has an effect in
applications where cross-section
views are displayed.
When this box is checked, all layers of an
alignment are displayed in a cross section
view.
When this box is not checked, only the active
layer will be displayed.
Description
Determines if point clouds from scan are dis-
played.
When this box is checked, the 3D point
clouds are displayed.
Available if Scans is ticked.
Selected lines
6 pixels
4 pixels
3 pixels
3D viewer