Table of Contents
Advertisement
Automatic aiming
Setup and orientation
Point averaging
49.2
49.2.1
Access
Measure sets of
angles
49.2.2
Access
Settings,
Parameters page
850
Automatic aiming (search and measurements) can be performed to a prism.
After completing the first measurements to each target point, the measure-
ments to the target points in subsequent sets are automated.
To record oriented grid coordinates, setup and orientation are required before
starting the Measure sets app.
Sets of Angles points are never calculated as an average, even if a measured
point of class Measured already exists with the same point ID.
Sets of Angles
Accessing Sets of Angles
Select Leica Captivate - Home: Measure sets.
Key
Description
OK
To select the highlighted option and to continue with the
next panel.
Fn Settings
To configure the Sets of Angles app. Refer to "49.2.2 Config-
uring Sets of Angles".
Description of options
Options
Create a new group
Select an existing group
Configuring Sets of Angles
Select Leica Captivate - Home: Measure sets. Press Fn Settings.
The explanations for the softkeys given here are valid for all pages, unless oth-
erwise stated.
Description
To define the target points. Refer to "49.2.3
Creating New Point Groups".
To select, edit and manage a points group of
the target points for the survey. Refer to
"49.2.4 Managing Existing Point Groups".
Sets of Angles - TS
Advertisement
Table of Contents
