Table of Contents
Advertisement
5.3
Bubble icons
30
Icon
Search & lock
Wait & lock
Target lock off
Target lock on
Target lock off
Filter learn
Filter on
Filter off
PowerSearch
Icon Pop-Up Bubble: Measure & Target
Icon
Meas any surface
Measure prism
Meas continuous
Meas single shot
Targets
Red laser on
Red laser off
Description
Searches for a prism to lock on.
Locks to a prism as soon as it enters the field of
view of automatic aiming. When previously locked to
a prism and target lock was lost. Works on all prisms
and tape targets.
☞
A PowerSearch helps to lock to shaking
prisms.
Stops the lock.
Sets Aim at target: With lock.
Sets Aim at target to the previous non-lock setting.
Starts a PowerSearch scan by doing three times a
360° scan with different vertical positions of the
telescope.
The PowerSearch scan finds prisms and other reflec-
tive spots in the surrounding of the instrument.
Around each found prism or reflective spot, an exclu-
sion area is defined. The exclusion area has the
dimension of Hz = ± 1 gon, V = ± 50 gon and
d = ± 12 m is defined.
Available when Filter learn was used before. Turns
on the PowerSearch filter and excludes the learned
prisms from a PowerSearch.
Available when Filter learn was used before. Turns
off the PowerSearch filter and includes all prisms in a
PowerSearch.
Prisms are searched for with PowerSearch in the
PowerSearch window when this icon is used.
☞
If this icon is selected and Meas any sur-
face is still set, then this setting is
changed to Measure prism.
Description
To measure to any surface (reflectorless). Automati-
cally sets Aim at target: Manually.
To measure to prisms.
To set the distance measurements to continuous.
To set the distance measurements to the previous
non-continuous mode.
To select a prism.
To turn the red laser of the reflectorless EDM on.
To turn the red laser of the reflectorless EDM off.
Icon Pop-up Bubbles
Advertisement
Table of Contents
