COGO
Description of the Intersection methods
Intersection methods
Bearing & bearing
Distance & distance
Description
Calculates the intersection point of two lines.
A line is defined by a point and a direction.
Elements that must be known are
the coordinates of two points.
•
•
the direction from these known points to
the COGO point.
offsets if necessary and configured.
•
The coordinates of the known points
can be taken from the job.
•
can be manually measured during the
•
COGO calculation.
•
can be entered.
Points with full coordinate triplets and posi-
tion only points can be used. Position only is
calculated, height can be typed in.
Calculates the intersection point of two cir-
cles. The circles are defined by the known
point as the centre point and the distance
from the known point to the COGO point as
the radius.
Elements that must be known are
the coordinates of two points.
•
•
the distance from the known points to
the COGO point.
The coordinates of the known points
can be taken from the job.
•
•
can be manually measured during the
COGO calculation.
can be entered.
•
Points with full coordinate triplets and posi-
tion only points can be used.
481