Table of Contents
Advertisement
Stake Line
Roads - Rail
☞
This page is available for Stake rail only.
This page displays the differences between the measured point and the
defined point. The position of the point to stake is reached when all difference
values are close to zero.
The chainage can be de-/incremented by pressing left/right arrow key. The
defined value for chainage increment is applied.
Refer to "Stake Track,page,Check Track,page" for a description of keys.
Refer to "51.4 Staking Out" for a description of the elements of the graphical
display.
Description of fields
Field
Option
Chainage
Display only
CL offset
Display only
Difference
Display only
in chainage
Nearest hz
Display only
tangent
point
Difference
Display only
in offset
Difference
Display only
in height
Next step
Page changes to the
Description
The current track chainage.
Perpendicular horizontal offset from the cen-
treline.
Difference between the defined Stake
chainage and the current chainage Chain-
age of the measured position.
If no defined chainage exists, for example if
staking out random chainages or checking,
this field shows -----.
The chainage difference between the meas-
ured point and the nearest tangent point of
the design is displayed. The nearest tangent
point is the start/end point of a road seg-
ment.
a b
Road_099
a
Vertical alignment
b
Horizontal alignment
Only tangent points are detected. A tangent
point is the start/end point of a road seg-
ment.
Horizontal offset between the defined posi-
tion and the current position. The Offset
defined on the
Vertical offset between the defined position
and the current position. The Height offset
defined on the
page.
page is taken into account.
page is taken into account.
805
Advertisement
Table of Contents
