Managing Code Groups - Leica Captivate Technical Reference Manual

8.5
Access
Code Groups
106
Field Option
Style Selectable list
Colour Selectable list
Attribute field Editable field

Managing Code Groups

In Codes, press Fn Group.
The listed code groups belong to
the codelist selected from the internal memory when creating a job.
OR
to the job codelist when editing a job.
Codes from currently active code groups are shown.
Check the box in front of a code group to activate the code group.
Uncheck the box in front of a code group to deactivate the code group. Codes
belonging to a deactivated code group are not displayed in Codes.
Key Description
OK To close the panel and return to the panel from where this
panel was accessed.
Description
When this box is checked, the stringing and
linework metadata are displayed in the code
box on the user definable page
When the code is newly selected, a new line
is started. When the same point code
remains selected, the next point being stored
is added to the current line.
When this box is not checked, the code box
is set for point coding by default. Linework
can still be activated.
Available when Linework is checked. The
style in which lines are represented in 3D
viewer and Infinity.
A colour in which the line is displayed.
Up to 20 attributes can be created.
☞
Attributes of attribute type manda-
tory or fixed and of value type real
or integer must be created in Infin-
ity.
.
Codelists