Table of Contents
Advertisement
37
37.1
Description
Access
Tools
Apps - The Toolbox
Apps - The Toolbox
The Toolbox
The toolbox contains extra functionality to those existing functions which are
available using the function keys.
Frequently used functionality can be accessed quickly. The change is applied
immediately. The workflow is not interrupted.
Press Fn Tools on any page in the some apps.
OR
Press a hot key or favourites key configured to User - App tools on any
page in the some apps.
Key
Description
OK
To apply the selected setting, or to access the selected func-
tion.
Description of options
Icon
Description
Reset back-
Available for the setup methods Set orientation, Known
sight point
backsight, Resection and Multiple backsights.
To check the backsight angle and correct the angle if neces-
sary while working with a job. Refer to "37.2 Reset back-
sight point".
Check point
To check a point or the instrument orientation. Refer to
"37.3 Check Point".
Measure
To determine the 3D coordinates of inaccessible points.
remote
Refer to "37.4 Measure - Remote Point".
points
2 Store
Available for Measure distance: Once and Measure dis-
tance: Once & fast. Aim at target: Manually must be
selected. To aim manually at the target and only record the
angle measurement (Hz/V) in face I and face II. The point
stored is an average of the two measurements.
2 Face
Available for Measure distance: Once and Measure dis-
tance: Once & fast. To take an angle and distance meas-
urement in Face I and Face II. The point stored is an average
of the two measurements. Using instruments fitted with
auto aiming, the point is automatically measured in both
faces. The resulting point is stored and the instrument is
returned to the first face.
429
Advertisement
Table of Contents
