Table of Contents
Advertisement
38.4.3
Diagram
Inverse Point to Line/
Inverse Current Pos
to Line,
Input page
472
Point to Line and Current Position to Line
P3
d2
P0
GS_003
For all point fields, 3D viewer can be used to select the desired point.
To type in coordinates for a known point open a selectable list. Press New to
create a point.
----- is displayed for unavailable information, for example Height difference
cannot be calculated if a position only point is used.
Key
Description
Calculate
To calculate COGO point.
Inverse
To calculate the values for the distance and the offset from
two existing points. Available if Azimuth or Horizontal dis-
tance is highlighted.
Last Inv
To recall previous results from COGO inverse calculations.
Available if Azimuth or Horizontal distance is highlighted.
Meas app
To measure a point manually for the COGO calculation. Avail-
able if Start point, End point or Offset point is highligh-
ted.
Page
To change to another page on this panel.
Fn Settings
To configure the COGO app.
Fn Modify
To modify the values manually. Available if Azimuth or Hori-
zontal distance is highlighted.
Description of fields
Field
Option
Offset point
Selectable list
P1
Known
P0 Start point
P1 End point
P2 Offset point
d1
P2
Unknown
P3 Base point
d1 Offset distance
d2 ΔLine distance
Description
Available for Inverse method: Point to line.
The offset point.
COGO
Advertisement
Table of Contents
