Table of Contents
Advertisement
Setup Results,
Setup page
Setup - TS
Field
Option
New height
Display only
Old height
Display only
Height qual-
Display only
ity (1 σ)
Easting
Display only
Northing
Display only
Height
Display only
Apply the
Check box
computed
height for
this setup
New orien-
Display only
tation
Next step
Page changes to the Setup page.
Key
Description
Set
To set the orientation, to store all setup data and exit the
app.
For Transfer height:
To store all setup data and exit the app.
Done
To exit the setup without setting it, the setup is incomplete.
Description
The calculated height is displayed.
Available for setup methods Multiple back-
sights and Transfer height.
The original height is displayed.
Available for setup methods Multiple back-
sights and Transfer height.
Standard deviation of the calculated setup
height.
Available for setup methods Transfer
height.
The calculated Easting is displayed.
Available for setup methods Resection, Ori-
entate to line and Orientate to object.
The calculated Northing is displayed.
Available for setup methods Resection, Ori-
entate to line and Orientate to object.
The calculated Height is displayed.
Available for setup methods Resection, Ori-
entate to line and Orientate to object.
When this box is checked, then the height
from the solution is set as the setup height.
When this box is not checked, then the
height is not updated.
Available for setup method Resection.
The calculated orientation is displayed.
Available for setup methods Orientate to
line.
889
Advertisement
Table of Contents
