Leica Captivate Technical Reference Manual page 640

Road Settings,
Tunnel design page
640
Key Description
Adjust Available for Gauge device: R500-FIX.
To adjust the gauge device from within the software.
Description of fields
Field Option
Gauge Show mes-
device sage
Selectable list
Gauge tar- Editable field
get offset
Gauge tar- Editable field
get height
Next step
Page changes to the Info page.
Available for Tunnel on TS only.
Description of fields
Field Option
Theoretical
profile
direction
Clockwise
Counter-
clockwise
Profile defi- Vertical
nition
Tilted
Scan area
defined by
Chainage
Distance
Description
No gauge device is used.
Select a gauge device. The internal offsets
are applied.
Horizontal offset of the prism from the fix
side of the gauge device.
Height of the prism on the gauge device.
Description
Defines the direction in which the design
profile is considered. The setting has an
influence on the profile offset sign.
The design profile is defined in a clockwise
direction. In underbreak areas, the profile
offset values are negative whereas in over-
break areas they are positive.
The design profile is defined in a counter-
clockwise direction. In underbreak areas, the
profile offset values are positive whereas in
overbreak areas they are negative.
Profiles are always defined as vertical.
Profiles are always defined perpendicular to
the vertical alignment of the tunnel axis.
Available for Stake: Scan profile.
When measuring tunnel profiles, it is possi-
ble to scan various profiles from one instru-
ment position.
Allows a scan area to be defined by entering
a back and forward chainage.
Allow a scan area to be defined by measur-
ing/entering a back distance and forward dis-
tance from the setup chainage.
Roads - General