Table of Contents
Advertisement
46.3.2
Description
Access step-by-step
Offset library
Job name,
Offsets
46.3.3
Requirements
Specific values on the
page
Roads - Rail
Offset Library
To select a different stored offset or to create a new point.
1.
In Stake Track/Check track,
2.
Highlight Offset ID and open the selectable list.
Display of information about the reference rail or the offset and the height dif-
ference.
This panel allows offsets relative to a reference line to be defined and stored in
the rail job. These points can be recalled at any time.
Key
Description
OK
To select a defined offset and to continue.
Add
To enter an offset.
Edit
To edit an existing offset.
Delete
To delete an existing offset.
Next step
Press Add or Edit.
This panel allows the values of the stake/check offsets to be entered/edited. In
addition to the horizontal and vertical offsets, an offset name (point ID) can be
entered for each item.
Next step
Press OK twice to return to Stake Track/Check track.
Working with Pendular Displacements
In Stake Track/Check Track,
type in a value for Pendular length.
Value
Description
Pendular
The defined pendulum length as entered on
length
page, select Offsets: From library.
page, check Use pendular displacement and
page.
807
Advertisement
Table of Contents
