Exporting Data From A Job To An Ascii Format - Leica Captivate Technical Reference Manual

11.2
Description
Access
Export ASCII Data
Job Menu - Export data
Format Characteristic
Points in file out-
side of geoid
model
XML Coordinate con-
version
Height
Specialities:
Points in file out-
side of CSCS
model
Points in file out-
side of geoid
model
Fbk, Rw5, Coordinate con-
Raw version
Height
Units

Exporting Data from a Job to an ASCII Format

The settings on this panel define the data that is converted and exported and
what format is used.
Data is exported from the selected job. Currently active view, filter and sort set-
tings are applied.
From the job menu select Export data\ASCII.
Key Description
OK To select the highlighted format file.
Fn Settings To define the format of the data to be exported.
Fn Filter To define the order in which points and lines are exported as
well as which points are exported.
Description
The ellipsoidal height is exported.
All points are converted to local grid
position using the coordinate system.
Orthometric height and ellipsoidal height
are supported.
Local grid position of the points outside
of CSCS model is not exported.
The ellipsoidal height is exported.
All points are converted to local grid
position using the coordinate system.
If a geoid model exists, then orthometric
height is supported, otherwise ellipsoidal
height is exported.
Metre, US Ft or Int Feet, Gons, Dec Deg,
DMS
133