Table of Contents
Advertisement
9.5
9.5.1
☞
Access step-by-step
Ellipsoids
9.5.2
Access
Coordinate Systems
Field
Option
Model
Selectable list
Next step
Store stores the transformation.
Ellipsoids
Accessing Ellipsoid Management
Ellipsoids cannot be accessed for coordinate systems with source RTCM. Refer
to "Automatic coordinate system (RTCM transformation parameters)".
1.
In Coordinate Systems, highlight a coordinate system.
2.
Press New or Edit.
3.
Highlight Ellipsoid.
4.
ENTER to access Ellipsoids.
Listed are all ellipsoids stored in the database DBX.
Key
Description
OK
To select the highlighted ellipsoid and to return to the previ-
ous panel.
New
To create an ellipsoid. Refer to "9.5.2 Creating/Editing an
Ellipsoid".
Edit
To edit the highlighted ellipsoid. Refer to "9.5.2 Creating/
Editing an Ellipsoid".
Delete
To delete the highlighted ellipsoid.
Fn Set deflt
To turn the highlighted ellipsoid into a user-defined default
ellipsoid stored in the instrument.
Fn Default
To recall the deleted default ellipsoids.
Creating/Editing an Ellipsoid
In Ellipsoids, highlight an ellipsoid. A copy of this ellipsoid is taken for further
configurations. Press New or Edit.
Description
The transformation model to be used. For
Model:Molodensky-Badekas, more edita-
ble fields are available.
113
Advertisement
Table of Contents
