Table of Contents
Advertisement
Define Quick Line
578
Key
Description
When Quick Line is the selected task, the line is defined by two points from
the design job, instead of an existing line.
☞
When the task is finished or a new quick line is defined, the previ-
ously defined quick line is automatically deleted from the database.
Key
Description
OK
To accept changes and continue with the subsequent panel.
Shifts
To apply horizontal and vertical shifts to the defined line.
Refer to "Define Shifts".
Meas app
To measure a point. Available when Start point or End
point is highlighted.
Fn Settings
To configure the Measure to line/Stake to line app.
Description of fields
Field
Option
Start point
Selectable list
End point
Selectable list
Azimuth
Display only
Horizontal
Display only
distance
Height dif-
Display only
ference
Slope dis-
Display only
tance
Grade
Display only
Height
Selectable list
From line
User
entered
Start point
of line
Description
The first point forming the line.
The last point forming the line.
The direction from the first to the second
known point.
The horizontal distance between the two
known points.
The height difference between the two
known points.
The slope distance between the two known
points.
The grade between the two known points.
Depending on the task chosen this parame-
ter determines the design height.
•
When measuring to a line, it affects the
height difference value.
When staking, it affects the delta height
•
value.
Heights are computed along the line.
Heights are typed in manually into the
Height field.
Heights are computed relative to the height
of the starting point of the line.
Measure to line/Stake to line
Advertisement
Table of Contents
