Table of Contents
Advertisement
Stake Results,
General page
Stakeout
Field
Option
-
-
If View results page after staking a point is checked in Settings, General
page, this panel opens automatically once a point is measured and stored.
Key
Description
OK
To return to the stake panel.
Page
To change to another page on this panel.
Description of fields
Field
Option
Design
Display only
point ID
Store
Editable field
staked
point as
Design
Display only
height
Measured
Display only
height
Cut/Fill
Display only
2D distance
Display only
3D distance
Display only
Description
The design height, which is the orthometric
height of the point to be staked, is dis-
played. If the orthometric height cannot be
displayed, the local ellipsoidal height is dis-
played. If it is not possible to display the
local ellipsoidal height, the WGS 1984 height
is displayed. The value for Height offset
configured in Settings, Heights page is not
taken into account.
Changing the value for Design height
changes the values displayed for cut and fill.
The orthometric height of the current posi-
tion is displayed with the stake height differ-
ence in the stakeout graphics. If the ortho-
metric height cannot be displayed, the local
ellipsoidal height is displayed. If it is not pos-
sible to display the local ellipsoidal height,
the WGS 1984 height is displayed. The value
for Height offset configured in Settings,
Heights page is taken into account.
Description
The point ID of the design point.
The point ID of the point staked.
The entered design elevation.
The height measured at the stored point.
The height difference between the Design
height and the Measured height.
Displays the horizontal difference from the
staked point to the point to be staked.
Displays the spatial difference from the
staked point to the point to be staked.
905
Advertisement
Table of Contents
