Leica Captivate Technical Reference Manual page 904

Key
Store
Distance
Flip view or
Flip view
Meas app
Page
Fn Settings
Fn Display
Fn Connect
and Fn Dis-
connect
Description of fields
Field
Point ID
Antenna
height
Target
height
Design
height
904
Description
For GS:
To store the measured point. When Automatically store
point is checked in GS Quality Control, General page, the
measured point is stored automatically. The key changes to
Measure.
For TS:
To store angles and distance. Distance must be measured
before.
For TS:
To measure a distance.
To reverse the graphical display top to bottom. A reversed
graphical display can be used when the point to be staked
lies behind the current position.
To measure more points which may be needed during staking
out.
Available when Measure is displayed.
To change to another page on this panel.
To configure the Stakeout app. Refer to "51.3 Configuring
Stakeout".
To configure what is displayed in the 3D viewer.
For GS:
To connect/disconnect from the GPS reference data.
Option Description
Selectable list The point ID of the point to be staked.
Editable field For GS:
The antenna height. Changes in the antenna
height do not update the antenna height as
defined in the active working style. The
changed antenna height is used until the app
is exited.
Editable field For TS:
The prism height.
Display only Available when Allow editing the height of
the selected point is not checked in Set-
tings, Heights page.
Editable field Available when Allow editing the height of
the selected point is checked in Settings,
Heights.
Stakeout