Table of Contents
Advertisement
Point Selection
770
the selection of existing single or multiple points from a job.
•
•
viewing the selected points along the alignment.
displaying the respective alignment chainage and offset information.
•
Any job containing points from any data storage device can be used.
The calculated alignment information is stored and a report sheet can be used
for extracting the data.
To select a point, check the box in front of the point ID.
Key
Description
Calculate
To perform the chainage and offset calculation and to con-
tinue with the subsequent panel. Calculated COGO points are
not yet stored.
More
To display information about the codes if stored with any
point, the Easting, Northing, Elevation, time, date and 3D
coordinate quality.
☞
☞
Page
To change to another page on this panel.
Fn None or
To deactivate or activate all points for the COGO calculation.
Fn All
☞
Point selection/deselection is possible on the 3D viewer page.
IF
a single point is to be selec-
ted/deselected
multiple points are to be
selected/deselected
all points are to be selected
The order in which the Easting and Northing col-
umns are shown depends on the Grid format
configured to be used in Regional, Coordinates
page.
The Easting, Northing and Elevation values are
shown in the unit configured in Regional, Dis-
tance page.
THEN
tap on the point.
drag the stylus on the panel in a diagonal
line to make a rectangular area.
press All or None.
Roads - Road
Advertisement
Table of Contents
