Leica Captivate Technical Reference Manual page 443

Hidden Point Set-
tings,
Height & offsets page
Apps - The Toolbox
Next step
Page changes to the Height & offsets page.
Key Description
OK To accept changes and to return to Measure Hidden Point.
Page To change to another page on this panel.
Description of fields
Field Option
Compute Check box
height for
hidden
points
Use dis- Check box
tance offset
Offset Editable field
Use angle Check box
offset
Type
Permanent
New for
each point
Angle offset Editable field
Use height Check box
offset
Type
Description
When this box is checked, heights are com-
puted for hidden points.
When this box is checked, a defined distance
offset is added to the measured distance.
Available when Use distance offset is
checked. The distance offset is automatically
added to the measured distance.
When this box is checked, a defined angle
offset is added.
The offset is an angle between the North of
the device being used and WGS1984 geo-
detic North. The offset is applied when
measuring hidden points using a device
capable of measuring azimuths.
When this box is not checked, no angle off-
set is applied to the azimuth measurement
received from the hidden point measurement
device.
Sets the default method for entering an
angle offset.
Applies a default value for the offset angle.
The value is changeable.
Offset angle values must be entered for each
new hidden point.
The default value for the offset angle.
When this box is checked, a defined height
offset is added to the measured.
When this box is not checked, no height off-
sets are used. The result is the delta height
between the centre of the device and the
aimed point.
Available when Use height offset is
checked.
443