Leica Captivate Technical Reference Manual page 716

Field
Length
For Element type: Curve
Field
Start azi-
muth
CP easting
CP northing
Curve direc-
tion
Radius
Deflection
angle
Length
End chain-
age
Int easting
Int northing
End easting
716
Option Description
Editable field Length of the straight element. Available for
Method:Azimuth & length.
Option Description
Editable field The azimuth of the tangent in the start
point. This azimuth is used from the previous
element. The value can be edited. Available
for Method:Radius & length,
Method:Radius & deflection angle or
Method:Radius & end chainage.
Editable field Easting of the centre point of the curve.
Available for Method:Centre point & end
coords.
Editable field Northing of the centre point of the curve.
Available for Method:Centre point & end
coords.
Right or Left The direction of the curve when looking in
the direction of increasing chainage. Availa-
ble for Method:Radius & length,
Method:Radius & deflection angle,
Method:Radius & end chainage or
Method:Radius & end coordinates.
Editable field Radius of the curve. The signs are set by the
system depending on the curve direction
defined in Curve direction. Available for
Method:Radius & length, Method:Radius
& deflection angle, Method:Radius & end
chainage or Method:Radius & end coordi-
nates.
Editable field The deflection angle. Available for
Method:Radius & deflection angle.
Editable field Length from the start to the end point of the
curve. Available for Method:Radius &
length.
Editable field The end chainage of the curve element can
be typed in. Available for Method:Radius &
end chainage.
Editable field Easting of the intermediate point of the 3-
pt-arc. Available for Method:3 points.
Editable field Northing of the intermediate point of the 3-
pt-arc. Available for Method:3 points.
Editable field Easting for the end chainage. Available for
Method:Radius & end coordinates,
Method:Centre point & end coords and
Method:3 points.
Roads - Alignment Editor