Table of Contents
Advertisement
42.6
Access
Edit Plane,
General page
Edit Plane,
Points page
608
Next step
Page changes to the Report sheet page. Refer to "36 Apps - General".
Editing a Reference Plane
After creating or selecting a reference plane, select Edit plane currently being
used in Measure to Plane or Grid Scan on Plane.
Key
Description
OK
To compute and store the reference plane.
Page
To change to another page on this panel.
Description of fields
Field
Option
Plane name
Editable field
Number of
Display only
points
Standard
Display only
deviation
Greatest
Display only
distance of
any point
from plane
Next step
Page changes to the Points page.
ü is shown in the Source point metadata for a point which is used as ori-
•
gin of the plane.
! is shown in the Out of limit metadata if the point is outside maximum
•
distance between a point and the calculated plane as defined on the Gen-
eral page.
Dd is the perpendicular distance of the point from the definition of the
•
plane.
Key
Description
OK
To compute and store the reference plane.
Add point
To add points from the job to define the reference plane.
Use
To change between Yes and No for the highlighted point.
Delete
To remove the highlighted point from the list.
Meas app
To measure a point to be used for the plane.
Page
To change to another page on this panel.
Next step
Page changes to the Origin page.
Description
The name of the reference plane.
Number of points used for plane definition.
Standard deviation of used points for plane
definition. ----- is displayed unless more than
four points are used to define the plane.
Maximum distance between measured point
and defined plane. ----- is displayed unless
more than four points are used to define the
plane.
Reference Plane & Grid Scan
Advertisement
Table of Contents
