Leica Captivate Technical Reference Manual page 454

Measure Foresight,
Automation behav-
iour page
Measure Foresight,
Quality control page
454
Key Description
OK To accept changes and continue to the next panel.
Page To change to another page on this panel.
Description of fields
Field Option
Measure- B'F'...F''B''
ment
sequence
B'F'...B''F''
B'B''F'F''...
B'B''F''F'...
B'F'...
When using Check box
auto target
aiming,
automati-
cally meas-
ure targets
Next step
Page changes to the Quality control page.
Description of fields
Field Option
Check for Check box
errors
before stor-
ing
Hz tolerance Editable field
V tolerance Editable field
Distance Editable field
tolerance
Check the Check box
backsight
height
Height limit Editable field
Description
All points are measured in face I, then meas-
ured in face II in reverse sequential order.
All points are measured in face I, then meas-
ured in face II.
Backsight point is measured in face I immedi-
ately followed by face II. Other points are
measured in face I, face II order.
Backsight point is measured in face I immedi-
ately followed by face II. Other points are
measured in alternating face order.
All points are measured in face I only.
For instruments with automatic aiming and
this option checked, automatic aiming search
and automatic aiming measurements are
done to specified targets and subsequent
sets.
Description
The entered horizontal, vertical and distance
tolerances are checked during the measure-
ments to verify accurate pointing and meas-
urements.
Tolerance for horizontal directions.
Tolerance for vertical directions.
Tolerance for distance.
The entered height tolerance for the back-
sight point is checked during the measure-
ments to verify accurate pointing and meas-
urements.
Tolerance for the backsight height.
Apps - The Toolbox