Taking An Image - Leica Captivate Technical Reference Manual

32.3
32.3.1
Description
Requirements
Camera & Imaging
Field Option
Automati- Check box
cally link
captured
image to
measured
point
Store cross- Check box
hairs on all
captured
images
Store data Check box
shown in
camera view
when press-
ing 'Cap-
ture'
Store sec- Check box
ond image
without
overlay data

Taking an Image

Overview
The camera can be used to take images of survey relevant objects.
•
• The images can be linked to points and lines stored in the job.
Screenshots can be taken from the display as additional information in
•
support cases.
Functionality is provided by icons in a groupbar. Some of the functions per-
formed by the icons can also be replicated using a key on the keyboard.
• A TS16 I/MS60/TS60 I must be used.
The camera settings must be active. Refer to "32.2 Camera Settings".
•
The documentation settings must be set. Refer to "32.2 Camera Settings".
•
Description
Available when Capture image from over-
view camera for every measured point or
Capture image from telescope camera
for every measured point is checked.
When this box is checked, the image taken
with a measurement is automatically linked
to the last measurement taken.
☞
Several images can be linked with
one point. One image can be
linked to several measured points.
When this box is not checked, the image
taken with a measurement is not automati-
cally linked to a measurement. The image can
be linked manually in data management.
When this box is checked, the crosshair is
stored on the picture.
When this box is checked, point and line
information is stored on images taken with
Capture. The information stored on the
image depends on the distance slider and
the settings defined in Object Display and
Sort & Filter.
When this box is checked, the image without
points and lines is saved additionally.
377