Table of Contents
Advertisement
Traverse Results,
Angle page
Traverse
Key
Description
Page
To change to another page on this panel.
FnSettings
To configure the Traverse app. Refer to "58.6 Configuring
Traverse".
Description of fields
Field
Option
Starting
Display only
point
Closing
Display only
point
Length of
Display only
error
Direction of
Display only
error
Difference
Display only
north
Difference
Display only
east
Height dif-
Display only
ference
Total dis-
Display only
tance
2D accuracy
Display only
1D accuracy
Display only
Next step
Page changes to the Angle page.
Description of fields
Field
Option
Foresight ID
Display only
Known azi-
Display only
muth
Azimuth
Display only
average
Angular mis-
Display only
closure
Next step
OK to move to close angle, to survey a sideshot, to adjust the traverse or to
quit the app.
Description
The point ID of the traverse start point.
The point ID of the traverse closing point.
The length of the misclosure error.
The direction of the misclosure error.
Error in north.
Error in east.
Error in height.
Total length of the traverse.
Position ratio of misclosure.
Height ratio of misclosure.
Description
Point ID of the closing angle point. Dis-
plays ----- if no values are available.
Defined azimuth of closing line. Displays -----
if no values are available.
Mean value of the measured azimuth closing
line. Displays ----- if no values are available.
Angular misclosure of traverse. Displays -----
if no values are available.
961
Advertisement
Table of Contents
