Leica Captivate Technical Reference Manual page 41

GNSS Data Logging
Status,
RTK base page
Icon Pop-up Bubbles
Field
Measurement com-
pleted
Time to go
Next step
Page changes to the RTK base page.
As shown below, the name of the page changes depending on the type of
base used.
Name of page
RTK base page
Base (Nearest) page
Base (i-MAX) page
Base (MAX) page
Base (VRS) page
Base (FKP) page
Description of fields
Field Option
Logging rate A time in sec
-----
Next step
OK exits GNSS Data Logging Status.
Description
The percentage of collected data required for suc-
cessful processing. It is a conservative estimate
based on a 10 ‑ 15 km baseline. The criteria used to
display this value depend on the settings for Auto-
matically stop point measurement in Leica Capti-
vate - Home: Settings\Point storage\GS quality
control.
The estimated time in hours, minutes and seconds
until the configured stop criteria is reached. The cri-
teria used to display this value depend on the set-
tings for Automatically stop point measurement
in Leica Captivate - Home: Settings\Point stor-
age\GS quality control.
Description
Base is a real base station.
Base is the closest to the rover determined
by for example SmartNet.
Base information is individualised Master-
Auxiliary corrections determined and sent by
for example SmartNet.
Base information is Master-Auxiliary correc-
tions determined and sent by for example
SmartNet.
Base is a virtual base station.
Base information is area correction parame-
ters.
Description
The logging rate at the base. This informa-
tion is shown if the real-time message for-
mat supports this information and raw
observations are being logged at the base.
Raw observations are not being logged, or
status information is not supported by RTK
format.
41