Table of Contents
Advertisement
39.3
39.3.1
Description
Access
Settings,
Residuals page
Determine Coordinate System
Field
Option
Use one
Check box
point locali-
sation
method
Next step
Press Fn Settings with Use one point localisation method NOT checked to
access Settings.
The Normal Method
Configuring the Normal Method
The setting allows options to be set, which are used in the Determine Coordi-
nate System app. These settings are stored within the active working style.
Press Fn Settings in Choose Jobs with Use one point localisation method
NOT checked.
The explanations for the softkeys given here are valid for all pages, unless oth-
erwise stated.
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Page
To change to another page on this panel.
Description of fields
Field
Option
Easting
Editable field
Northing
Editable field
Description
Number of control points needed: One con-
trol point for both the WGS 1984 and the
local datum.
Transformation to use:
Onestep or Twostep when information
•
about the necessary rotations and scale
factor is known.
Classic 3D when the rotations are set to
•
zero and the scale factor to one.
Description
The limit above which Easting residuals are
flagged as possible outliers.
The limit above which Northing residuals are
flagged as possible outliers.
533
Advertisement
Table of Contents
