Roads - Road
Field
Option
Offset
Editable field
Height off-
set type
Absolute
Relative to
line or
Hold hinge
Relative to
surface
grade
Height
Editable field
Slope loca-
Selectable list
tion
Description
The horizontal offset of the hinge point from
the centreline/reference line.
The vertical offset type for the hinge point.
The only option available for 2D lines.
Available for 3D lines.
Available for Stake: Manual slope. The
manual slope is defined by:
Hinge offset relative to the selected
•
hinge reference line
•
Hinge height, calculated by using the
hinge offset on the selected surface
grade (left or right selected surface
grade, depending on Offset – or +)
b
c
a
Road_105
a
Hinge point of manual slope
b
Defined hinge offset (-)
c
Left surface grade of design
d
Selected hinge reference
The elevation of the hinge point (absolute
height). Available for Height offset
type: Absolute.
Differentiates if the defined slope is a cut/fill
and left/right.
b
d
Road_079
a Hinge point
b Left cut
c Right cut
d Left fill
e Right fill
d
a
c
e
779