Table of Contents
Advertisement
9.7
9.7.1
Use in the field
Create geoid models
on the instrument
9.7.2
Access step-by-step
Geoid Models
Coordinate Systems
Geoid Models
Overview
For use on the instrument in the field, geoid field files are created from the
geoid model.
Geoid models can be created on the instrument in one of two ways:
1.
The geoid field file is stored on a data storage device and can be used
when the data storage device is inserted in the instrument.
2.
The geoid field file is stored in the internal memory of the instrument.
Refer to "9.7.3 Adding a New Geoid Model from the Data Storage Device /
Internal Memory"for information on how to transfer geoid field files to the
internal memory on the instrument.
Accessing Geoid Model Management
1.
In Coordinate Systems, highlight a coordinate system.
2.
Press New or Edit.
3.
Highlight Geoid model.
4.
ENTER to access Geoid Models.
Listed are all geoid models stored in the database DBX. Any unavailable infor-
mation is shown as -----. For example, ----- would be shown if the geoid field
file associated to the geoid model is not available on the data storage device/
internal memory.
Key
Description
OK
To select the highlighted geoid model and to return to the
previous panel.
Edit
To view the highlighted geoid model. None of the fields can
be edited. The geoid field file from which the geoid model
was created must be stored in the internal memory or in the
\DATA\GPS\GEOID directory on the data storage device.
Delete
To delete the highlighted geoid model. The geoid field file
which was associated with this geoid model is then also
deleted.
117
Advertisement
Table of Contents
