Table of Contents
Advertisement
Access
GNSS Raw Data Log-
ging
288
The settings on this panel define the logging of raw observations.
The licence for raw data logging is required to log GNSS raw data on the
•
GS, CS or TS instrument.
The licence for RINEX logging is required to log RINEX data on the GS or CS.
•
RINEX data cannot be logged on the TS instrument.
The licence key can only be loaded from an SD card using the Webserver or
myWorld@Leica Geosystems.
Select Leica Captivate - Home: Settings\GS Sensor\GNSS raw data log-
ging.
Key
Description
OK
To accept changes.
Description of fields
Field
Option
Log GNSS
Check box
raw data
Store data
CS control-
on
ler or GS
sensor
TS instru-
ment or GS
sensor
Log data
Static
when
dynamics
are
Static &
kinematic
Kinematic
Description
Activates raw data logging.
☞
Not possible on GS18 when Use
tilt compensation: On is set in
Tilt Compensation.
Data can either be logged to the field con-
troller or to the GS.
For GS08plus, data can only be logged to the
field controller.
For SmartStation, data can either be logged
to the TS or to the GS.
Raw observation logging during static inter-
vals when occupying a point. The instrument
has to be stationary. Available for SmartSta-
tion.
Raw observation logging during static and
moving intervals. For post-processed kine-
matic rover operations. Unavailable for
SmartStation.
Raw observation logging during moving inter-
vals. For post-processed kinematic antenna
operations. Unavailable for SmartStation.
Settings - GS Sensor
Advertisement
Table of Contents
