☞
38.4
38.4.1
Access
COGO Inverse
468
Field
Option
Multiqua-
dratic
Next step
Page changes to the Report sheet page. Refer to "36 Apps - General".
Azimuth is used throughout this chapter. This term should also always be con-
sidered to mean Bearing.
COGO Calculation - Inverse Method
Selecting the Inverse Method
Select Inverse from the COGO menu.
Key
Description
OK
To select a method and to continue with the subsequent
panel.
Description of the Inverse methods
Inverse
Description
methods
Point to
The direction, the distance and the coordinate differences
point
between the two known points can be calculated depending
on the data available. Points with full coordinate triplets,
position only points and height only points can be used.
Elements that must be known are
•
coordinates of two points.
The coordinates of the known points
•
can be taken from the job.
can be manually measured during the COGO calculation.
•
can be entered.
•
Description
Distributes the residuals using a multiqua-
dratic interpolation approach.
COGO