Leica Captivate Technical Reference Manual page 943

Example for offset
point IDs
☞
Measure - Auto Points
Next step
IF
offset point configuration is finished
a second offset point is to be config-
ured
The offset point ID is a combination of the auto point ID and an identifier as a
prefix or suffix.
The right most part of the auto point ID is incremented within the point ID. If
the length of the auto point ID plus identifier is greater than 16 characters,
then the auto point ID is truncated from the left.
Auto point ID Identifier
Auto1234 OS1
Auto1235
Auto1234 OS1
Auto1235
Refer to "26.3 ID templates" for more information on point IDs.
THEN
OK to return to the Measure panel.
Page and then Offset 2 or Offset 1
to change to the settings panel for
the second point.
Prefix/Suffix Offset point ID
Prefix OS1Auto1234
OS1Auto1235...
Suffix Auto1234OS1
Auto1235OS1...
943