Table of Contents
Advertisement
31
31.1
Description
31.2
Description
Adding/removing
instruments to/from
mySecurity
Activating the theft
protection
Instrument Protection (Theft Protection)
Instrument Protection (Theft Protection)
Anti-Theft Alarm
Available on TS and CS in remote mode.
The anti-theft alarm can support a protection against instrument theft while on
the working site. The alarm goes off if the instrument is unlevelled for more
than 3s. The sound is played in highest volume.
1.
Set up and level the instrument.
2.
Configure a hot key or favourites to activate/deactivate the anti-theft
alarm. Refer to "2.2 Configurable Keys" for information.
3.
Use a hot key to activate the alarm.
4.
Perform the survey on the site.
5.
When the survey is finished, use a hot key to deactivate the alarm.
☞
The anti-theft alarm functionality must be licenced.
mySecurity
mySecurity is a cloud-based theft protection. A locking mechanism ensures
that the instrument is disabled and can no longer be used. A Leica Geosystems
service centre will inform local authorities if such an instrument turns up.
mySecurity is activated in myWorld.
1.
Go to myWorld@Leica Geosystems
(https://myworld.leica-geosystems.com).
☞
You must add your instruments to myProducts first, before the
instruments can be added to mySecurity.
2.
Select myTrustedServices/mySecurity.
Available information for listed instruments:
Activation date of the mySecurity service
•
Renewal date of the mySecurity service
•
•
Stolen status, in case of the instrument has been flagged as sto-
len
3.
Click Add to add an instrument to mySecurity.
Select the instrument from the selectable list.
Click OK.
4.
Select an instrument.
Click Remove to delete the instrument from mySecurity.
For an active theft protection, the instrument must be connected to myWorld
within a defined time interval.
If the instrument is not connected within the defined interval, then the instru-
ment is blocked and cannot be used. In this case, the instrument must be con-
nected to myWorld again and the theft protection must be reactivated.
1.
Click the check box to select an instrument.
2.
Click Details.
371
Advertisement
Table of Contents
