Table of Contents
Advertisement
☞
Stake Points,
page
Stakeout
P1
a
b
P0
TS_010
For information on camera and images refer to "32 Camera & Imaging".
The pages shown are from a typical working style. An extra page is available
when a user-defined page is used.
The selected view of the 3D viewer is the one last used,
•
when leaving the app and returning to it.
when turning off and on the instrument.
•
For an explanation of the graphical symbols refer to "35.4.4 Orientation Infor-
mation for Stakeout".
Key
Description
Measure
For GS:
To start measuring the point being staked. The key changes
to Stop. The difference between the current position and
the point being staked is still displayed.
For TS:
To measure a distance and store distance and angles.
Stop
For GS:
To end measuring the point being staked. When Automati-
cally stop point measurement is checked in GS Quality
Control, General page recording of positions ends automat-
ically as defined by the stop criteria. The key changes to
Store. After ending the measurements, the differences
between the measured point and the point to be staked are
displayed.
For TS with Help me navigate:
From behind instrument:
P0 Setup
P1 Current position
P2
P2 Point to be staked
c
a
Distance
b
Horizontal angle
c
Cut or fill
903
Advertisement
Table of Contents
