Managing Existing Point Groups - Leica Captivate Technical Reference Manual

Select Points - Meas-
ure,
Sets page
49.2.4
Description
Access
Existing Point Groups
Sets of Angles - TS
Key Description
Measure To measure and store the angles and distance, and to return
to Define Points for Set.
Distance To measure a distance.
Store To store data and to return to Define Points for Set.
Page To change to another page on this panel.
Description of fields
Field Option
Difference Display only
in Hz
AR diff Display only
Difference Display only
in V
Difference Display only
in slope dist

Managing Existing Point Groups

A point group of the target points for the survey can be selected.
Highlight Select an existing group in Measure sets of angles and OK.
Key Description
OK To continue with the next panel.
Fn Settings To configure the Sets of Angles app. Refer to "49.2.2 Config-
uring Sets of Angles".
Description
Difference between the current horizontal
angle and the horizontal angle to this target
when selected.
Available when Hz angle display: Angle
right is configured in Regional, Angle page.
Difference between the current angle right
and the angle right to this target when
selected.
Difference between the current vertical angle
and the vertical angle to this target when
selected.
Difference between the current slope dis-
tance to the target and the slope distance to
this target when selected.
857