Leica Captivate Technical Reference Manual page 123

Settings (GSI)
Define Ht Type &
Easting
10.3
Requirements
Access
Import XML Data
Job Menu - Import data
Field Option
Number of Selectable list
lines/pt
Next step
1. OK leads back to Import ASCII/GSI Data.
2. Fn Heights to access Define Ht Type & Easting.
Description of fields
Field Option
Switch Check box
WI81/WI82
Definition Selectable list
of feet
Next step
1. OK leads back to Import ASCII/GSI Data.
2. Fn Heights to access Define Ht Type & Easting.
Description of fields
Field Option
Import as Selectable list
Easting Selectable list
OK leads back to Import ASCII/GSI Data.
Importing XML Data
At least one file in XML format with the file extension *.xml has to be stored in
the \DATA directory of the data storage device.
☞ The file can contain points, lines, alignments (Road/Rail/Tunnel jobs)
and DTM's/PLA's.
From the job menu select Import data\XML.
Key Description
OK To import the data.
Description
Available for Delimiter: Line feed. The num-
ber of lines used to describe each point.
Description
If this box is checked, then all WI 81 data,
normally Easting, is imported as Northing and
all WI 82 data, normally Northing, is imported
as Easting. This coordinate switch is neces-
sary for "left handed" coordinate systems.
The type of feet used in the GSI file.
Description
The height type for the imported data.
The Easting can be imported as written in the
ASCII file or it can be multiplied by -1. This
change is required by some coordinate sys-
tems.
123