Table of Contents
Advertisement
RTK Data Link Status,
Connectivity page
RTK Data Link Status,
DynDNS page
46
Field
Ground marker to
antenna reference
point
Coordinates of
Number of aux ref
Antenna at base
Sensor type at
base
Next step
IF
other coordinate types must be
viewed
another page must be accessed
this panel must be quit
This panel shows the status real-time connectivity as dynamic troubleshooting
panel. It shows the success of each of the steps in the connectivity to receive
real-time corrections. If one step fails or is skipped, the check box is
unchecked.
As each step is successfully completed, the check box is activated.
The page shows the status of the DynDNS connection.
This page is available, if DynDNS is activated. Refer to "18.2 CS internet / GS
internet / TS Internet".
☞
Unavailable for CS35. Use the status panel in Windows.
Description
For RTK data format: Leica, RTK data format:
•
Leica 4G, RTK data format: RTCM v3 or RTK
data format: RTCM 9,2 v2/RTCM 1,2 v2 with
RTCM version: 2.3:
The antenna height at the base from the marker
to the MRP.
For RTK data format: CMR/CMR+ and RTK
•
data format: RTCM 18,19 v2 or RTK data for-
mat: RTCM 18,19 v2 with RTCM version: 2.2:
The antenna height at the base from the marker
to the phase centre.
For all other RTK data format-----: is displayed
•
because the data format does not include infor-
mation about the antenna height.
The coordinates for the base station which are trans-
ferred depend on the active real-time data format.
•
For real-time messages which include antenna
height and antenna type: Marker.
For real-time messages which do not include
•
antenna information: Phase Centre of L1.
The number of active auxiliary base stations from
which data is received. Availability depends on selec-
ted network.
The antenna used at the base.
The instrument type used at the base.
THEN
Fn Coord. Local coordinates are
available when a local coordinate
system is active.
Page.
OK exits the panel.
Icon Pop-up Bubbles
Advertisement
Table of Contents
