Leica Captivate Technical Reference Manual page 467

Settings,
Residuals page
COGO
Field Option
Compute ht
when com-
puting
intersect pt
using TS
observa-
tions
Using aver-
age
Use upper
height
Use lower
height
Next step
Page changes to the Residuals page.
This page applies to Shift, Rotate & Scale (Match Points).
Description of fields
Field Option
Easting Editable field
Northing Editable field
Height Editable field
Residual
Distbtn
None
1/distance,
1/distance²
or
1/
distance³/²
Description
When this box is checked:
After storing a measurement with Measure
or Store motorised instruments change face
automatically, non-motorised instruments
access Telescope Positioning. The meas-
urements of face I and face II are averaged
on the base of face I. The averaged value is
stored.
When this box is not checked:
No automatic measurement in two faces.
Defines the height being used within TS
observations.
Using an average of the two observations.
Using the upper height.
Using the lower height.
Description
The limit above which Easting residuals are
flagged as possible outliers.
The limit above which Northing residuals are
flagged as possible outliers.
The limit above which Height residuals are
flagged as possible outliers.
The method by which the residuals of the
control points are distributed throughout the
transformation area.
No distribution is made. Residuals remain
with their associated points.
Distributes the residuals according to the dis-
tance between each control point and the
newly transformed point.
467