Table of Contents
Advertisement
Settings,
Info page
572
Next step
Page changes to the Info page.
Two things can be configured on this page:
1.
The required information for the stake or measure method to be displayed
on the
page.
2.
If and which user-defined page is displayed.
Key
Description
OK
To confirm the changes and continue.
Clear
To clear all parameters from all lines.
Fn About
To display information about the app name, the version num-
ber, the date of the version, the copyright and the article
number.
Fn Default
To set the default value for all lines.
Description of fields
Field
Option
Show user
Check box
defined
page
Page to
Selectable list
show
Method
Display only
1st line to
Selectable list
16th line
Always available
Point ID
Antenna
height
Target
height
Code
Attribute 01
and Attrib-
ute 02
Description
Shows a selectable list for the pages.
The user-defined page to be shown.
The method is based on the selected Meas-
ure to line/Stake to line task. The settings in
the following lines can only be changed for
the current task.
The method defines the parameters available
to view on the
page of the app. Different
combinations of the parameters to view can
be stored.
Define which parameters are viewed on each
line. Up to 16 lines of parameters can be
defined.
☞
Some of the options are explained
in graphics in the following chap-
ters.
To enter the point ID.
For GS:
To enter the antenna height.
For TS:
To enter the target height.
Editable field for codes.
Editable field for attributes for codes.
Measure to line/Stake to line
Advertisement
Table of Contents
