Dataset
6.5
Description
Access step-by-step
Job Codes
74
The panel is similar to the panel that opens when View & edit data was
selected from the job menu. Refer to "7.2 Accessing Data Management" for a
description of the panel.
The differences are:
All changes done in the data set are applied to the original jobs.
•
For the key New: To create a point/line. New points/lines are stored in the
•
main job and then displayed in the data set.
For the metadata, Source is displayed. The linked job to which the point
•
belongs.
•
On the 3D viewer page, the points and lines from the linked jobs are dis-
played. Selected filters for the data set points are applied.
The Dataset panel can also be accesses by a hot key or a favourites keys.
Managing Job Codes
To view, edit, group and sort all codes currently stored in the job.
1.
Select View & edit job properties from the job menu in
Leica Captivate - Home.
2.
Page until the Codelist page is active.
3.
When creating a job: Open the selectable list for Codelist.
4.
When editing a job: Edit
5.
Codes to access Job Codes.
Key
Description
OK
To return to the previous panel.
New
To create a code. Refer to "8.4.2 Creating/Editing a Code".
Edit
To edit the highlighted code. Accesses Edit Code where new
attributes can be added to a code and line styles can be
changed.
Fn Group
To access Code Groups. To view, create, activate and deacti-
vate code groups. Refer to "8.5 Managing Code Groups".
Fn Sort
To access Sort Codes. To sort codes by code name, code
description, quick code or last used.
Job Menu - Jobs