Leica Captivate Technical Reference Manual page 150

Create new polyline -
Several segments
150
Key Description
Meas app To measure a point manually. Available when a point field is
highlighted.
Fn Indiv ID To change between entering an individual line ID different to
and the defined ID template and the running line ID according to
Fn Run the ID template.
Description of fields
Field Option
Line ID Editable
field
Azimuth Editable
field
Differ- Editable
ence in field
height
Grade Editable
field
Horizon- Editable
tal dis- field
tance
Line Display
length only
Radius Editable
field
Start Selectable
point list
Second Selectable
point list
End point Selectable
list
Point ID Editable
field
1. In Create a Polyline select Several segments.
Description
The name of the new line. The configured ID tem-
plate for lines is used. The ID can be changed in
the following ways:
• To start a new sequence of line IDs, type over
the line ID.
For an individual name independent of the ID
•
template Fn Indiv ID. Fn Run changes back
to the next ID from the configured ID tem-
plate.
The azimuth of the line from the start point.
The difference in height from the start point to
the end point of the line.
The gradient of the line from the start point to the
end point of the line.
The horizontal grid distance from the start point to
the end point of the line.
For lines: The horizontal grid distance between the
two points of the line. If the distance cannot be
calculated, ----- is displayed.
For arcs. The horizontal grid distance along the arc
between the points. If the distance cannot be cal-
culated, ----- is displayed.
The radius of the arc.
The first point forming the line.
The medium point forming the arc.
The last point forming the line.
The end point of the defined line. Available for
creating a line with Method:Point, brng, dist,
height diff or Point, brng, dist, grade.
Creating Points and Lines